Filter
-
Procedure
- Metal spinning
- Deep drawing
- Punching
- Flanging
- Beading
- Pruning
- Cutting off
- More
Apply filters
-
Industry
- Chemistry / Pharma
- Medicine
- Agricultural machinery
- Gastronomy
- Plant and apparatus engineering
- Aviation / Aerospace
- Electrical industry
- Process technology
- Arts and Crafts / Design
Apply filters
-
Materials
- Steel
- Non-ferrous metals
- Titanium
- Chrome steel
- Galvanised steel
- Aluminum
- Precious metals
Apply filters
-
Geometry
- Shape round
- Shape angular
- Thick-walled
- Thin-walled
- Size 10-50mm
- Size 50-125mm
- Size 125-250mm
- Size 250-450mm
- Size 450-1'000mm
- Size >1'000mm
- Freeform
- Thickness 0.1-0.5mm
- Thickness 0.5-1.5mm
- Thickness 1.5-3.0mm
- Thickness >3.0mm
Apply filters
-
Lot size
- Single pieces (Manufacture)
- Small series 5-100 Stück
- 101-500
- 500-5000
- 5000-20000
- > 20000
- Prototypes Automotive
Apply filters
Apply filters
back to selection
Float half / sleeve (012)
2 holders are welded together to form a float, the floats are used to measure the level of liquid media using the float principle. The level indicator works without current, the level is displayed magnetically.
Challenge
The silicone seal must hold within the groove, this groove is created by a so-called indentation, this undercut must be created after the moulding process
Solution
The float half is pulled 2x, then soft annealed and pulled 2x again.
Finally, the edge is trimmed.
Technische Daten
Material | chrome steel 1.4435 |
Material thickness | 0,5mm |
Dimensions | D 50mm / H 100mm |